SDI-104 Operator's Manual
Version 2008

[Search Manual] [Table of Contents] [FAQ] [Go to Previous] [Go to Next]

Appendix A

SDI Technical Specifications

Embedded Computer System

  • CPU
 1 GHz Celeron
  • RAM
 1 G Byte
  • Disk
 80 G Byte UDMA (minimum)
  • I/O
 PS2 keyboard, HD15S video – rear panel
USB2 – front panel – for software upgrades
  • Network
 100 M bps or 1 G bps using a standard RJ45 connector – rear panel
  • Ingestor Board
 SSEC designed with PC104+ interface
  • Feature
 Boots from CompactFlash, OS runs from RAM

 

Power

  • Input Voltage
 100 to 240 VAC , 50-60 Hz
  • Power
 < 60 W
  • Connector
 IEC-320-C14 – rear panel
  • Circuit breaker
 1.5A – rear panel

Note: Unit comes with 7.5 foot power cord which mates to the input power connector and comes with a NEMA 5-15P connector on the other end.

 

Operating Environment

  • Temperature
 40-90 ° F
  • Humidity
 20-80% RH non condensing

 

Enclosure

  • Type
 19 inch rack mount
  • Height
 2 RU (3.5 inches)
  • Depth
 15 inches
  • Cooling
 internal fan

 

Signal Specifications

  • Inputs
 Clock, Data;
Data sampled on the falling edge of Clock
  • Input Connector
 BNC female or D15P – rear panel
  • Input Configuration
 Single ended (TTL) or RS422 (differential)
  • Input Termination
 50 , 75 or 120 ohm
  • Input Data Rate
 10 Kbps – 40 Mbps
  • Data Types
 NRZ-L, NRZ-S, NRZ-M set by jumper

 

External Indicators

  • Power
 red LED – front panel
  • Status
 green LED – front panel

[Search Manual] [Table of Contents] [FAQ] [Go to Previous] [Go to Next]